Changed from a dig uno to a Dig Quad controller and the documentation for configuring WLED does not match what I see in LED & Hardware setup. Tried multiple settings and can’t get any lights to work. My control wire is connected to the LED1 on the board.
Sounds like you need @Quindor. 
Hey hey, what’s the problem exactly? LED1 should be GPIO16 like on the Dig-Uno too, you can find all the pins over here!
Set the GPIO to 16 but still not working. Maybe this is wrong? I don’t even know what this is.
I Also don’t know what the Buttons, 0-3 further down on the config screen should be–right now I have them disabled.
Connie